|
Description – Servo Drive Repair
Make –GEC
Model - MkII SB
|
|
The GED MkII SB DC servo drive is a grandfather of the servo drive generation, it has been around for many years and there are still a number of them on older machine tools in industry. We have been repairing these for 20 years and have a lot of experience with them. When this one was sent to us it was in a very poor state. It had been to another repair company who has not carried out a quality repair. There were areas of the PCB that were burnt, a number of the power transistors were of the incorrect specification, two of the driver stages were faulty and cosmetically the perspex cover was burnt. Our findings were emailed over to our customer with a quote for a repair and refurbish to the drive. The repair was accepted and the customer commented that he was finding it difficult to get support on these drives. The drive was stripped and cleaned. The power transistors were replaced with original OEM specification devices. The PCB burn marks were repaired and insulated. All electrolytic capacitors were replaced with higher specification types. The driver circuits were repaired and the faults on the brake circuit were rectified. The brake voltage was set to specification. Once this was complete the drive was reassembled. A full load and soak test was carried out on our DC servo rig where all aspects of the drives performance were checked. To finish off the repair we supplied and fitted new insulating pillars and a new Perspex cover to the drive
|
Old, tired and burnt up
|
Repaired, tested and as new
|
|
SKF Certified Rebuilds
 |
SKF Certified Rebuilds
The smart way to service motors
The sure way to enhance reliability
SKF has recognized Fletcher Moorland's commitment to quality and expertise by awarding the prestigious designation of SKF Certified Rebuilder,
The objective is quite simple: prevent reoccurring failures, increase motor service life and increase your profitability
read more ...... |
|
Reducing Costs
 |
“Across the Globe industries are being forced to reduce costs.
We like to think that in some way
we are helping companies achieve this. Did you know that by using our repair service you will save money and reduce your maintenance costs? Typical savings of 70% can be made compared with buying new and in most cases our guarantee periods are longer than the OEM's.
Repairing equipment makes sense, especially in this current economic downturn. To find out how we can reduce your maintenance costs call 01782 411021 anytime day or night.”
Matt Fletcher
Managing Director
|
|
What does it take to become a servo motor repair specialist?
 |
At Fletcher Moorland we have been developing and progressing our servo motor repair department for the past 25 years. We have managed this by combining the skills from each of our core business activities to develop a specialist servo motor repair department. More.... |
|
|
