Dematic Test Rig - Our test area for Distribution Centre repairs simulates both High Bay Crane operation and Sorter operation.


	Open 24 Hours +44 (0) 1782 411021

Dematic Test Rig

Our test area for Distribution Centre repairs simulates both High Bay Crane operation and Sorter operation.

Dematic

We have built a single crane axis with a Revcon power unit, a KEB inverter and a motor. This is all controlled by the Phoenix Contact Interbus S system linked to a computer controller. Our test rig simulates the movement of a crane axis as it would do on site. Each time we repair an item of equipment from a crane, it is linked to our test rig for final verification before shipping back to our customer.

Our sorter test area simulates the operation of electronic controls and motors on the sorter system. We have built a rig that simulates the operation of the in-feed belts, this verifies the repair to the Indramat Ecodrive servo drive (DKC series) and the Indramat servo motor (MKD series) We have a full test rig and support for the Stober servo motors and drives that are also used on belt operation.

We also have a full test rig for the cross belt sorter drives (DAC 8 & MDS 8 controllers)

Finally we are able to repair and fully test the Linear Induction Motors that provide the motive force for the sorter system. Our test rig runs the motor as the sorter system does on site. We are able to check and verify all fault alarms and status conditions from all the controller outputs. We are able to program and reprogram the modules to suit each distribution site. Linear Motor Repair Article

Dematic

For more information on our repair service for distribution centre equipment, please call +44 (0) 1782 411021 and ask for Andy Mansell or Matt Fletcher, we will be pleased to come and visit your site to discuss how we can help with your maintenance breakdowns.

SKF Certified Rebuilds

SKF Certified Rebuilds
The smart way to service motors
The sure way to enhance reliability

SKF has recognized Fletcher Moorland's commitment to quality and expertise by awarding the prestigious designation of SKF Certified Rebuilder,

The objective is quite simple: prevent reoccurring failures, increase motor service life and increase your profitability

Reducing Costs

“Across the Globe industries are being forced to reduce costs.
We like to think that in some way we are helping companies achieve this. Did you know that by using our repair service you will save money and reduce your maintenance costs? Typical savings of 70% can be made compared with buying new and in most cases our guarantee periods are longer than the OEM's.
Repairing equipment makes sense, especially in this current economic downturn. To find out how we can reduce your maintenance costs call 01782 411021 anytime day or night.”

Matt Fletcher
Managing Director

What does it take to become a servo motor repair specialist?

At Fletcher Moorland we have been developing and progressing our servo motor repair department for the past 25 years. We have managed this by combining the skills from each of our core business activities to develop a specialist servo motor repair department. More....

FML BLOG

Repair Services

24 Hour Breakdown Support Specialists for Industrial Plant & Automation Equipment

UVDB